This kit enables you to run your Hot Head torch off a bulk cylinder of propane (LPG) gas. Although Mapp gas is the preferred gas for Hot Heads the costs soon start adding up as you get more hooked on Beadmaking. Propane gas available from many garages, welding supplies, camp sites and garden centres is a close alternative to Mapp gas for your Hot Head although burning slightly lower in temperature this is not a major problem. Savings are huge by using propane as a normal 13 kilo cylinder will cost between £12 - £18.00 and will give 100 hours use. This kit contains a 3.5 bar propane regulator, propane flashback arrestor, 5 mtr of propane hosing , quick release connector and the torch connector.The quick release connector enables you to work with the cylinder outside the workroom with the hosing passing through an open window or door, at the end of the day instead of disconnecting the regulator simply quick release the connector to split the hose in two.You can then store the hose in the workroom and leave the cylinder outside. All the kit is joined together and ready to use once you screw the cylinder on one end and the torch on the other.