Bead Making Equipment
!

Goldstone Ribbons,50grms
NEW
!
These are new 104 coe Goldstone ribbons used for decorating your creations.50grms
These are Goldstone ribbons of 104coe glass goldstone . The ribbons are 40cms (16") long and average 5mm wide.There will be an average of 10-12 ribbons per 50grms.

Blustone Ribbons,50grms
NEW
!
These are new 104 coe Bluestone ribbons used for decorating your creations.50grms
These are Bluestone ribbons of 104coe glass bluestone . The ribbons are 40cms (16") long and average 5mm wide.There will be an average of 10-12 ribbons per 50grms.

Mixed Goldstone/Blustone Ribbons,100grms
NEW
!
These are new 104 coe Goldstone & Bluestone ribbons used for decorating your creations.100grms
These are Goldstone & Bluestone ribbons of 104coe glass goldstone & blustone . The ribbons are 40cms (16") long and average 5mm wide.There will be an average of 20-24 ribbons per 100grms.

Cooling Bubbles
NEW
!
Brand New Japanese Cooling Bubbles
Fantastic Japanese cooling bubbles that are used to prolong the cooling process . There are 2 litres in  the bag which is enough to fill a biscuit tin , laying the beads into the bubbles after taking from the flame as you work the "bubbles" will surround the bead and cool it much slower than vermiculite and fibre blanket , better for the bead and allowing you to produce much bigger beads without a worry of cracking before they get to the kiln.

Cooling Bubbles with Tin
NEW
!
Two Litres of Cooling Bubbles with a silver Tin , the tin has a hinged lid and measures 17cm wide x 9cm deep x 22cm long.

The Oxygen Concentrator Kit

FREE POST
!
Larger picture
The Ultimate Kit for your beadmaking needs!

This is a semi-professional setup with the dual fuel Minor Burner, enabling you to work hotter and faster than the Hot Head.The Oxy-Con comes with hosing to connect to the Minor Burner and will provide oxygen 24/7 (the Oxy-Con runs on 240volts electric)

Oxygen Concentrator Kit Includes:
Refurbished Oxygen Concentrator, (complete with one year guarantee)
Nortel Minor Burner and hosing,
a 4 bar propane regulator,
Propane flashback arrestor,
5 mtr of Propane hosing,
Torch connector,
Pair of ACE 202 Safety glasses

The Ultimate Hot Head Kit (Downtown Glasses)
!
Evereything you need to get you going with a Hot Head on bulk propane gas.
This kit supplies you with everything we can think of to get you started with a Hot Head Torch and beadmaking . The kit includes a Hot Head Torch , bench bracket to secure it to your worktop,a bulk propane kit including regulator, flashback and hose to run the torch on economical propane gas .Also included is a sheet of fibre blanket for cooling the beads, large fusion bead release, 24 x mandrels, diamond bead reamer for cleaning the beads, tub of frit, tweezers,stainless steel rake, graphite paddle, 2 kilos of assorted Effetre opaque and transparent glass rods( approx 100 rods), dual marver, small doming block, You Can Make Beads book by Cindy Jenkins and a pair of Downtown safety specs .

The Ultimate Hot Head Kit (Fit Over Glasses)
!

Evereything you need to get you going with a Hot Head on bulk propane gas.

Please note we are currently out of stock of doming blocks and will substitute another item to the same value.

This kit supplies you with everything we can think of to get you started with a Hot Head Torch and beadmaking . The kit includes a Hot Head Torch , bench bracket to secure it to your worktop,a bulk propane kit including regulator, flashback and hose to run the torch on economical propane gas .Also included is a sheet of fibre blanket for cooling the beads, large fusion bead release, 24 x mandrels, diamond bead reamer for cleaning the beads, tub of frit, tweezers,stainless steel rake, graphite paddle, 2 kilos of assorted Effetre opaque and transparent glass rods( approx 100 rods), dual marver, small doming block, You Can Make Beads book by Cindy Jenkins and a pair of "Fit Over" glasses that will comfortable fit over the top of your normal reading glasses that you might have to wear in everyday use .

The Deluxe Plus Kit
!
Please note we are currently out of stock of doming blocks and will substitute this item for a bead reamer of the same value .

The Deluxe Plus includes 

Hot Head Torch,
1 Kilo of mixed Effetre glass rods,
2x Pots of Bead release,
20 x mandrels,
Brass doming block,
ACE 202 Safety glasses,
Stainless steel rake,
Metal dual marver,
Cindy Jenkins book "You Can Make Glass Beads"

We will also include a step by step guide to making your first beads with a hints and tips section.

Bead Making Starter Kit
!

A Bead Making Starter Kit.

This is a starter kit it includes

1 hot head torch,
1 kilo mixed glass,
20 stainless steel mandrels
2 pots of bead release.

Bulk Fuel Hot Head Connector Kit
!
Larger picture
The complete kit to run your Hot Head Torch off bulk propane gas.

This kit enables you to run your Hot Head torch off a bulk cylinder of propane (LPG) gas. Although Mapp gas is the preferred gas for Hot Heads the costs soon start adding up as you get more hooked on beadmaking. Propane gas available from many garages, welding supplies, camp sites and garden centres is a close alternative to Mapp gas for your Hot Head although burning slightly lower in temperature this is not a major problem. Savings are huge by using propane as a normal 13 kilo cylinder will cost between £12 - £18.00 and will give 100 hours use. This kit contains a 4 bar  propane regulator, propane flashback arrestor, 5 mtr of propane hosing and the torch connector.All the kit is joined together and ready to use once you screw the cylinder on one end and the torch on the other.

Bulk Fuel Hot Head Connector Kit Deluxe
!
Larger picture
The complete kit to run your Hot Head Torch off bulk propane gas with quick release connector for easy storage.

This kit enables you to run your Hot Head torch off a bulk cylinder of propane (LPG) gas. Although Mapp gas is the preferred gas for Hot Heads the costs soon start adding up as you get more hooked on beadmaking. Propane gas available from many garages, welding supplies, camp sites and garden centres is a close alternative to Mapp gas for your Hot Head although burning slightly lower in temperature this is not a major problem. Savings are huge by using propane as a normal 13 kilo cylinder will cost between £12 - £18.00 and will give 100 hours use. This kit contains a 4 bar  propane regulator, propane flashback arrestor, 5 mtr of propane hosing , quick release connector and the torch connector.The quick release connector enables you to work with the cylinder outside the workroom with the hosing passing through an open window or door, at the end of the day instead of disconnecting the regulator simply quick release the connector to split the hose in two.You can then store the hose in the workroom and leave the cylinder outside. All the kit is joined together and ready to use once you screw the cylinder on one end and the torch on the other.

Bobcat Oxygen Concentrator Kit

FREE POST
!
Larger picture

The Ultimate Kit for your beadmaking needs!

(picture s for illustration only and the kit will include a GTT Bobcat Torch)

This is a semi-professional setup with the dual fuel Bobcat Burner, enabling you to work hotter and faster than the Hot Head.The Oxy-Con comes with hosing to connect to the Bobcat Burner and will provide oxygen 24/7 (the Oxy-Con runs on 240volts electric)

Bobcat Oxygen Concentrator Kit Includes:
Refurbished Oxygen Concentrator, (complete with one year guarantee) 
GTT Bobcat Burner and hosing,
a 4 bar propane regulator,
Propane flashback arrestor,
5 mtr of Propane hosing,
Torch connector,
Pair of ACE 202 Safety glasses

Criket Oxygen Concentrator Kit

FREE POST
!
Larger picture

The Ultimate Kit for your beadmaking needs!

(Picture is for illustration use only and the kit will include a GTT Cricket Torch)

 

This is a semi-professional setup with the dual fuel GTT Cricket Burner, enabling you to work hotter and faster than the Hot Head.The Oxy-Con comes with hosing to connect to the Cricket Burner and will provide oxygen 24/7 (the Oxy-Con runs on 240volts electric)

Oxygen Concentrator Kit Includes:
Refurbished Oxygen Concentrator, (complete with one year guarantee) 
GTT Cricket Burner and hosing,
a 4 bar propane regulator,
Propane flashback arrestor,
5 mtr of Propane hosing,
Torch connector,
Pair of ACE 202 Safety glasses

New 10ltr Regalia Oxygen Concentrator
NEW
!

New 10ltr oxy-con with enough power to run 2 torches.

Commercial oxygen built model.

FREE DELIVERY within the U.K

This 10ltr oxygen concentrator will provide enough power to run 2 torches (Minors,Bobcats,Crickets or Mini CC)or a Nortel Mid Range and Mid Range Plus on its own. These are brand new units direct from the manufacturer with a 3 year guarantee. Measurements are 26"high x 15" wide x 19" deep and will provide 7-10ltrs of oxygen at 92% purity.The units will be shipped directly from the manufacturer with deliver 2-3 days from point of order.

***********These are for glassblowing use only,NO MEDICAL USE *************

Oxygen Concentrator
FREE POST
!
Larger picture
Oxycon with 12 month guarantee

 

This is the oxycon these have been overhauled, new filters have been put in and we run them on one of our torches for at least 5 hours.There is a 12 month guarantee, and our usual friendly support, you can ring us if you have any queries.You just need hoseing which will come with the oxycon and 2 jubilee clips,you put one end of the hoseing on the oxycon and put the jubilee clip on tight then the other end goes on the torch and put the jubilee clip on and tighten. Next you have to just plug it in to a socket, push the on button and it will beep for a few seconds and you are ready to use it ,the yellow light may stay on but you dont have to worry about that.               

***********THESE ARE NOT TO BE USED FOR MEDICAL USE.***********

Free shipping within the UK

 

 

The Creation Station
!
Larger picture
Creation Station with Butterfly Arm Rests

The Creation Station is designed to sit on the bench in front of you and offer arm rests while working for long periods and also offer stability for that delicate stringer placement.

Designed to fit all torches including Minor , Mini CC and Hot Head the station is secured to the bench with two screws and offers comfort and ridged support for arms and elbows.

The Creation Station
!
Larger picture
Creation Station with Butterfly Arm Rests

The Creation Station is designed to sit on the bench in front of you and offer arm rests while working for long periods and also offer stability for that delicate stringer placement.

Designed to fit all torches including Minor , Mini CC and Hot Head the station is secured to the bench with two screws and offers comfort and ridged support for arms and elbows.

The Nortel Minor Burner
!
Larger picture
The Nortel Minor Burner
The Nortel minor burner is a great easy to use torch ,we use one all the time ,if you see us at shows come and have a look as we demonstrate with one.You will need some hoseing, a flashback arrestor , a regulator.and some jubilee clips.

The Hot Head Torch
!
Larger picture
The Hot Head Torch
This is the hot head torch,all you need to get it to work is some Mapp Gas.( we get it from B&Q)