!
!

3 Way Oxygen Gas Splitter

This allows you to run two or three torches from a single oxygen cylinder.
Fitted in line between the regulator and torch, it splits the oxygen hose to run off to a third torch. (you will need to purchase a second hose to connect to the torch)

3 Way Propane Gas Splitter Kit

Includes all the hose and tails/hose clips needed.

This allows you to run three or more torches from a single propane cylinder.
Fitted in line between the regulator and torch, it splits the propane hose to run off to a second and third torch. (you will need to purchase a second hose to connect to the torch)

3 way Oxygen Gas Splitter Kit

Includes all the hose and tails/hose clips needed.

This allows you to run two  or more torches from a single oxygen cylinder.
Fitted in line between the regulator and torch, it splits the oxygen hose to run off to a third torch. (you will need to purchase a second hose to connect to the torch)

Propane Hose Coupler

1 Hose coupler
This allows you to bolt two hoses together safely to extend their length.3/8" thread.

Oxygen Hose Coupler

1 Hose coupler
This allows you to bolt two hoses together safely to extend their length.3/8" thread.

Hose Clips x 10

Pack of 10 hose clips
Pack of 10 hose clips to attach the hose to torches or connectors, can use on oxygen and propane 6mm i.d hose.Safer than jubilee clips.

Propane Nut & Tail

One (1) propane nut and tail for fitting to 6mm i.d hose . Made of brass the thread is standard 3/8"

Oxygen Nut & Tail

One (1) oxygen nut and tail for fitting to 6mm i.d hose . Made of brass the thread is standard 3/8"

"B" Thread Nut & Tail (pr)

For USA imported torches.1x propane nut and tail and 1x oxygen with 2 "O" rings.
These oxygen and propane nut and tails are for those that have bought a USA model torch that has the "B" thread fittings on rather than the UK threaded barbs.